Ford Fusion: Supplemental Restraint System / Airbag Supplemental Restraint System (SRS). Diagnosis and Testing
Ford Fusion 2013–2020 Service Manual / Body and Paint / Body and Paint / Supplemental Restraint System / Airbag Supplemental Restraint System (SRS). Diagnosis and Testing
DTC Chart: Restraint Control Module (RCM)
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices.
REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
RCM DTC Chart
| DTC | Description | Action |
|---|---|---|
| B0001:11 | Driver Frontal Stage 1 Deployment Control: Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: A (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0001:12 | Driver Frontal Stage 1 Deployment Control: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: A (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0001:13 | Driver Frontal Stage 1 Deployment Control: Circuit Open |
REFER to: Pinpoint Test - DTC: A (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0001:1A | Driver Frontal Stage 1 Deployment Control: Circuit Resistance Below Threshold |
REFER to: Pinpoint Test - DTC: A (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0001:2B | Driver Frontal Stage 1 Deployment Control: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0001:4A | Driver Frontal Stage 1 Deployment Control: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0002:11 | Driver Frontal Stage 2 Deployment Control: Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: B (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0002:12 | Driver Frontal Stage 2 Deployment Control: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: B (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0002:13 | Driver Frontal Stage 2 Deployment Control: Circuit Open |
REFER to: Pinpoint Test - DTC: B (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0002:1A | Driver Frontal Stage 2 Deployment Control: Circuit Resistance Below Threshold |
REFER to: Pinpoint Test - DTC: B (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0002:2B | Driver Frontal Stage 2 Deployment Control: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0002:4A | Driver Frontal Stage 2 Deployment Control: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0004:11 | Driver Knee Bolster Deployment Control: Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: C (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0004:12 | Driver Knee Bolster Deployment Control: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: C (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0004:13 | Driver Knee Bolster Deployment Control: Circuit Open |
REFER to: Pinpoint Test - DTC: C (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0004:1A | Driver Knee Bolster Deployment Control: Circuit Resistance Below Threshold |
REFER to: Pinpoint Test - DTC: C (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0004:2B | Driver Knee Bolster Deployment Control: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0004:4A | Driver Knee Bolster Deployment Control: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0005:11 | Collapsible Steering Column Deployment Control: Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: D (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0005:12 | Collapsible Steering Column Deployment Control: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: D (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0005:13 | Collapsible Steering Column Deployment Control: Circuit Open |
REFER to: Pinpoint Test - DTC: D (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0005:1A | Collapsible Steering Column Deployment Control: Circuit Resistance Below Threshold |
REFER to: Pinpoint Test - DTC: D (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0005:2B | Collapsible Steering Column Deployment Control: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0005:4A | Collapsible Steering Column Deployment Control: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0010:11 | Passenger Frontal Stage 1 Deployment Control: Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: E (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0010:12 | Passenger Frontal Stage 1 Deployment Control: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: E (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0010:13 | Passenger Frontal Stage 1 Deployment Control: Circuit Open |
REFER to: Pinpoint Test - DTC: E (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0010:1A | Passenger Frontal Stage 1 Deployment Control: Circuit Resistance Below Threshold |
REFER to: Pinpoint Test - DTC: E (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0010:2B | Passenger Frontal Stage 1 Deployment Control: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0010:4A | Passenger Frontal Stage 1 Deployment Control: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0011:11 | Passenger Frontal Stage 2 Deployment Control: Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: F (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0011:12 | Passenger Frontal Stage 2 Deployment Control: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: F (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0011:13 | Passenger Frontal Stage 2 Deployment Control: Circuit Open |
REFER to: Pinpoint Test - DTC: F (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0011:1A | Passenger Frontal Stage 2 Deployment Control: Circuit Resistance Below Threshold |
REFER to: Pinpoint Test - DTC: F (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0011:2B | Passenger Frontal Stage 2 Deployment Control: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0011:4A | Passenger Frontal Stage 2 Deployment Control: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0013:11 | Passenger Knee Bolster Deployment Control: Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: G (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0013:12 | Passenger Knee Bolster Deployment Control: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: G (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0013:13 | Passenger Knee Bolster Deployment Control: Circuit Open |
REFER to: Pinpoint Test - DTC: G (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0013:1A | Passenger Knee Bolster Deployment Control: Circuit Resistance Below Threshold |
REFER to: Pinpoint Test - DTC: G (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0013:2B | Passenger Knee Bolster Deployment Control: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0013:4A | Passenger Knee Bolster Deployment Control: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0050:11 | Driver Seatbelt Sensor: Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: H (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0050:12 | Driver Seatbelt Sensor: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: H (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0050:13 | Driver Seatbelt Sensor: Circuit Open |
REFER to: Pinpoint Test - DTC: H (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0050:1D | Driver Seatbelt Sensor: Circuit Current Out of Range |
REFER to: Pinpoint Test - DTC: H (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0050:2B | Driver Seatbelt Sensor: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0050:4A | Driver Seatbelt Sensor: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0052:11 | Passenger Seatbelt Sensor: Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: I (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0052:12 | Passenger Seatbelt Sensor: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: I (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0052:13 | Passenger Seatbelt Sensor: Circuit Open |
REFER to: Pinpoint Test - DTC: I (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0052:1D | Passenger Seatbelt Sensor: Circuit Current Out of Range |
REFER to: Pinpoint Test - DTC: I (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0052:2B | Passenger Seatbelt Sensor: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0052:4A | Passenger Seatbelt Sensor: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0054:11 | Second Row Center Seatbelt Sensor: Circuit Short to Ground |
INSPECT the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0054:12 | Second Row Center Seatbelt Sensor: Circuit Short to Battery |
INSPECT the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0054:13 | Second Row Center Seatbelt Sensor: Circuit Open |
INSPECT the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0054:1D | Second Row Center Seatbelt Sensor: Circuit Current Out of Range |
INSPECT the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0054:2B | Second Row Center Seatbelt Sensor: Signal Cross Coupled |
INSPECT the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0054:4A | Second Row Center Seatbelt Sensor: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0057:11 | Third Row Center Seatbelt Sensor: Circuit Short to Ground |
INSPECT the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0057:12 | Third Row Center Seatbelt Sensor: Circuit Short to Battery |
INSPECT the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0057:13 | Third Row Center Seatbelt Sensor: Circuit Open |
INSPECT the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0057:1D | Third Row Center Seatbelt Sensor: Circuit Current Out of Range |
INSPECT the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0057:2B | Third Row Center Seatbelt Sensor: Signal Cross Coupled |
INSPECT the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0057:4A | Third Row Center Seatbelt Sensor: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0070:11 | Driver Seatbelt Pretensioner "A" Deployment Control: Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: J (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0070:12 | Driver Seatbelt Pretensioner "A" Deployment Control: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: J (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0070:13 | Driver Seatbelt Pretensioner "A" Deployment Control: Circuit Open |
REFER to: Pinpoint Test - DTC: J (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0070:1A | Driver Seatbelt Pretensioner "A" Deployment Control: Circuit Resistance Below Threshold |
REFER to: Pinpoint Test - DTC: J (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0070:2B | Driver Seatbelt Pretensioner "A" Deployment Control: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0070:4A | Driver Seatbelt Pretensioner "A" Deployment Control: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0072:11 | Passenger Seatbelt Pretensioner "A" Deployment Control: Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: K (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0072:12 | Passenger Seatbelt Pretensioner "A" Deployment Control: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: K (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0072:13 | Passenger Seatbelt Pretensioner "A" Deployment Control: Circuit Open |
REFER to: Pinpoint Test - DTC: K (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0072:1A | Passenger Seatbelt Pretensioner "A" Deployment Control: Circuit Resistance Below Threshold |
REFER to: Pinpoint Test - DTC: K (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0072:2B | Passenger Seatbelt Pretensioner "A" Deployment Control: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0072:4A | Passenger Seatbelt Pretensioner "A" Deployment Control: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B007E:11 | Driver Seatbelt Pretensioner "C" Deployment Control: Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: L (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B007E:12 | Driver Seatbelt Pretensioner "C" Deployment Control: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: L (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B007E:13 | Driver Seatbelt Pretensioner "C" Deployment Control: Circuit Open |
REFER to: Pinpoint Test - DTC: L (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B007E:1A | Driver Seatbelt Pretensioner "C" Deployment Control: Circuit Resistance Below Threshold |
REFER to: Pinpoint Test - DTC: L (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B007E:2B | Driver Seatbelt Pretensioner "C" Deployment Control: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B007E:4A | Driver Seatbelt Pretensioner "C" Deployment Control: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B007F:11 | Passenger Seatbelt Pretensioner "C" Deployment Control: Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: M (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B007F:12 | Passenger Seatbelt Pretensioner "C" Deployment Control: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: M (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B007F:13 | Passenger Seatbelt Pretensioner "C" Deployment Control: Circuit Open |
REFER to: Pinpoint Test - DTC: M (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B007F:1A | Passenger Seatbelt Pretensioner "C" Deployment Control: Circuit Resistance Below Threshold |
REFER to: Pinpoint Test - DTC: M (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B007F:2B | Passenger Seatbelt Pretensioner "C" Deployment Control: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B007F:4A | Passenger Seatbelt Pretensioner "C" Deployment Control: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0080:11 | Driver Seatbelt Load Limiter Deployment Control: Circuit Short to Ground |
INSPECT the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0080:12 | Driver Seatbelt Load Limiter Deployment Control: Circuit Short to Battery |
INSPECT the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0080:13 | Driver Seatbelt Load Limiter Deployment Control: Circuit Open |
INSPECT the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0080:1A | Driver Seatbelt Load Limiter Deployment Control: Circuit Resistance Below Threshold |
INSPECT the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0080:2B | Driver Seatbelt Load Limiter Deployment Control: Signal Cross Coupled |
INSPECT the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B0080:4A | Driver Seatbelt Load Limiter Deployment Control: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0082:11 | Passenger Seatbelt Load Limiter Deployment Control: Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: N (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0082:12 | Passenger Seatbelt Load Limiter Deployment Control: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: N (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0082:13 | Passenger Seatbelt Load Limiter Deployment Control: Circuit Open |
REFER to: Pinpoint Test - DTC: N (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0082:1A | Passenger Seatbelt Load Limiter Deployment Control: Circuit Resistance Below Threshold |
REFER to: Pinpoint Test - DTC: N (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0082:2B | Passenger Seatbelt Load Limiter Deployment Control: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0082:4A | Passenger Seatbelt Load Limiter Deployment Control: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00A0:09 | Occupant Classification System: Component Failure |
REFER to: Pinpoint Test - DTC: O (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00A0:4A | Occupant Classification System: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: O (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00A0:63 | Occupant Classification System: Circuit / Component Protection Time-Out |
REFER to: Pinpoint Test - DTC: O (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00A0:64 | Occupant Classification System: Signal Plausibility Failure |
REFER to: Pinpoint Test - DTC: O (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00A0:68 | Occupant Classification System: Event Information |
REFER to: Pinpoint Test - DTC: O (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00B5:11 | Driver Seat Track Position Restraints Sensor: Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: P (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00B5:12 | Driver Seat Track Position Restraints Sensor: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: P (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00B5:13 | Driver Seat Track Position Restraints Sensor: Circuit Open |
REFER to: Pinpoint Test - DTC: P (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00B5:1D | Driver Seat Track Position Restraints Sensor: Circuit Current Out of Range |
REFER to: Pinpoint Test - DTC: P (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00B5:2B | Driver Seat Track Position Restraints Sensor: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00B5:4A | Driver Seat Track Position Restraints Sensor: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00C5:11 | Passenger Seat Track Position Restraints Sensor: Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: Q (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00C5:12 | Passenger Seat Track Position Restraints Sensor: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: Q (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00C5:13 | Passenger Seat Track Position Restraints Sensor: Circuit Open |
REFER to: Pinpoint Test - DTC: Q (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00C5:1D | Passenger Seat Track Position Restraints Sensor: Circuit Current Out of Range |
REFER to: Pinpoint Test - DTC: Q (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00C5:2B | Passenger Seat Track Position Restraints Sensor: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00C5:4A | Passenger Seat Track Position Restraints Sensor: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00D5:12 | Restraint System Passenger Disable Indicator: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: R (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00D5:14 | Restraint System Passenger Disable Indicator: Circuit Short to Ground or Open |
REFER to: Pinpoint Test - DTC: R (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00D5:4A | Restraint System Passenger Disable Indicator: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1193:00 | Crash Event Storage Full and Locked: No Sub Type Information |
This DTC indicates the vehicle has been in a crash. INSTALL a new RCM and impact sensors. REFER to: Inspection and Repair after a Supplemental Restraint System (SRS) Deployment (501-20B Supplemental Restraint System, General Procedures). |
| B11CF:11 | Passenger Frontal Airbag Canister Vent: Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: S (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B11CF:12 | Passenger Frontal Airbag Canister Vent: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: S (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B11CF:13 | Passenger Frontal Airbag Canister Vent: Circuit Open |
REFER to: Pinpoint Test - DTC: S (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B11CF:1A | Passenger Frontal Airbag Canister Vent: Circuit Resistance Below Threshold |
REFER to: Pinpoint Test - DTC: S (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B11CF:2B | Passenger Frontal Airbag Canister Vent: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B11CF:4A | Passenger Frontal Airbag Canister Vent: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B11D8:12 | Restraint Event Notification: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: T (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B11D8:14 | Restraint Event Notification: Circuit Short to Ground or Open |
REFER to: Pinpoint Test - DTC: T (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1202:12 | Restraint System Passenger Enable Indicator: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: ZZ (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1202:14 | Restraint System Passenger Enable Indicator: Circuit Short to Ground or Open |
REFER to: Pinpoint Test - DTC: ZZ (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1202:4A | Restraint System Passenger Enable Indicator: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1404:11 | Driver Side Airbag Deployment Control: Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: U (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1404:12 | Driver Side Airbag Deployment Control: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: U (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1404:13 | Driver Side Airbag Deployment Control: Circuit Open |
REFER to: Pinpoint Test - DTC: U (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1404:1A | Driver Side Airbag Deployment Control: Circuit Resistance Below Threshold |
REFER to: Pinpoint Test - DTC: U (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1404:2B | Driver Side Airbag Deployment Control: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1404:4A | Driver Side Airbag Deployment Control: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1405:11 | Driver Side Curtain Deployment Control 1: Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: V (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1405:12 | Driver Side Curtain Deployment Control 1: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: V (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1405:13 | Driver Side Curtain Deployment Control 1: Circuit Open |
REFER to: Pinpoint Test - DTC: V (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1405:1A | Driver Side Curtain Deployment Control 1: Circuit Resistance Below Threshold |
REFER to: Pinpoint Test - DTC: V (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1405:2B | Driver Side Curtain Deployment Control 1: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1405:4A | Driver Side Curtain Deployment Control 1: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1407:11 | Passenger Side Airbag Deployment Control: Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: W (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1407:12 | Passenger Side Airbag Deployment Control: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: W (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1407:13 | Passenger Side Airbag Deployment Control: Circuit Open |
REFER to: Pinpoint Test - DTC: W (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1407:1A | Passenger Side Airbag Deployment Control: Circuit Resistance Below Threshold |
REFER to: Pinpoint Test - DTC: W (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1407:2B | Passenger Side Airbag Deployment Control: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1407:4A | Passenger Side Airbag Deployment Control: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1408:11 | Passenger Side Curtain Deployment Control 1: Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: X (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1408:12 | Passenger Side Curtain Deployment Control 1: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: X (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1408:13 | Passenger Side Curtain Deployment Control 1: Circuit Open |
REFER to: Pinpoint Test - DTC: X (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1408:1A | Passenger Side Curtain Deployment Control 1: Circuit Resistance Below Threshold |
REFER to: Pinpoint Test - DTC: X (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1408:2B | Passenger Side Curtain Deployment Control 1: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1408:4A | Passenger Side Curtain Deployment Control 1: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B140C:11 | Second Row Driver Side Seatbelt Sensor: Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: OO (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B140C:12 | Second Row Driver Side Seatbelt Sensor: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: OO (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B140C:13 | Second Row Driver Side Seatbelt Sensor: Circuit Open |
REFER to: Pinpoint Test - DTC: OO (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B140C:1D | Second Row Driver Side Seatbelt Sensor: Circuit Current Out of Range |
REFER to: Pinpoint Test - DTC: OO (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B140C:2B | Second Row Driver Side Seatbelt Sensor: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B140C:4A | Second Row Driver Side Seatbelt Sensor: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B140D:11 | Second Row Passenger Side Seatbelt Sensor: Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: PP (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B140D:12 | Second Row Passenger Side Seatbelt Sensor: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: PP (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B140D:13 | Second Row Passenger Side Seatbelt Sensor: Circuit Open |
REFER to: Pinpoint Test - DTC: PP (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B140D:1D | Second Row Passenger Side Seatbelt Sensor: Circuit Current Out of Range |
REFER to: Pinpoint Test - DTC: PP (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B140D:2B | Second Row Passenger Side Seatbelt Sensor: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B140D:4A | Second Row Passenger Side Seatbelt Sensor: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B140E:11 | Third Row Driver Side Seatbelt Sensor: Circuit Short to Ground |
INSPECT the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B140E:12 | Third Row Driver Side Seatbelt Sensor: Circuit Short to Battery |
INSPECT the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B140E:13 | Third Row Driver Side Seatbelt Sensor: Circuit Open |
INSPECT the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B140E:1D | Third Row Driver Side Seatbelt Sensor: Circuit Current Out of Range |
INSPECT the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B140E:2B | Third Row Driver Side Seatbelt Sensor: Signal Cross Coupled |
INSPECT the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B140E:4A | Third Row Driver Side Seatbelt Sensor: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B140F:11 | Third Row Passenger Side Seatbelt Sensor: Circuit Short to Ground |
INSPECT the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B140F:12 | Third Row Passenger Side Seatbelt Sensor: Circuit Short to Battery |
INSPECT the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B140F:13 | Third Row Passenger Side Seatbelt Sensor: Circuit Open |
INSPECT the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B140F:1D | Third Row Passenger Side Seatbelt Sensor: Circuit Current Out of Range |
INSPECT the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B140F:2B | Third Row Passenger Side Seatbelt Sensor: Signal Cross Coupled |
INSPECT the RCM connectors for foreign material and REPAIR as necessary. If no foreign material is found, INSTALL a new RCM. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B140F:4A | Third Row Passenger Side Seatbelt Sensor: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1410:11 | Second Row Driver Side Seatbelt Pretensioner Deployment Control: Circuit Short To Ground |
REFER to: Pinpoint Test - DTC: DDD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1410:12 | Second Row Driver Side Seatbelt Pretensioner Deployment Control: Circuit Short To Battery |
REFER to: Pinpoint Test - DTC: DDD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1410:13 | Second Row Driver Side Seatbelt Pretensioner Deployment Control: Circuit Open |
REFER to: Pinpoint Test - DTC: DDD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1410:1A | Second Row Driver Side Seatbelt Pretensioner Deployment Control: Circuit Resistance Below Threshold |
REFER to: Pinpoint Test - DTC: DDD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1410:2B | Second Row Driver Side Seatbelt Pretensioner Deployment Control: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1410:4A | Second Row Driver Side Seatbelt Pretensioner Deployment Control: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1412:11 | Second Row Passenger Side Seatbelt Pretensioner Deployment Control: Circuit Short To Ground |
REFER to: Pinpoint Test - DTC: EEE (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1412:12 | Second Row Passenger Side Seatbelt Pretensioner Deployment Control: Circuit Short To Battery |
REFER to: Pinpoint Test - DTC: EEE (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1412:13 | Second Row Passenger Side Seatbelt Pretensioner Deployment Control: Circuit Open |
REFER to: Pinpoint Test - DTC: EEE (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1412:1A | Second Row Passenger Side Seatbelt Pretensioner Deployment Control: Circuit Resistance Below Threshold |
REFER to: Pinpoint Test - DTC: EEE (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1412:2B | Second Row Passenger Side Seatbelt Pretensioner Deployment Control: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1412:4A | Second Row Passenger Side Seatbelt Pretensioner Deployment Control: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1413:11 | Driver Frontal Restraints Sensor: Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1413:12 | Driver Frontal Restraints Sensor: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1413:13 | Driver Frontal Restraints Sensor: Circuit Open |
REFER to: Pinpoint Test - DTC: Y (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1413:2B | Driver Frontal Restraints Sensor: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1413:4A | Driver Frontal Restraints Sensor: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1413:81 | Driver Frontal Restraints Sensor: Invalid Serial Data Received |
DIAGNOSE and REPAIR all other impact sensor Diagnostic Trouble Codes (DTCs) first. If only DTC B1413:81 was retrieved, INSTALL a new LH front impact severity sensor. REFER to: Front Impact Severity Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B1413:96 | Driver Frontal Restraints Sensor: Component Internal Failure |
INSTALL a new LH front impact severity sensor. REFER to: Front Impact Severity Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B1414:11 | Driver Side Restraints Sensor 1: Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: Z (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1414:12 | Driver Side Restraints Sensor 1: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: Z (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1414:13 | Driver Side Restraints Sensor 1: Circuit Open |
REFER to: Pinpoint Test - DTC: Z (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1414:2B | Driver Side Restraints Sensor 1: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1414:4A | Driver Side Restraints Sensor 1: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1414:81 | Driver Side Restraints Sensor 1: Invalid Serial Data Received |
DIAGNOSE and REPAIR all other impact sensor Diagnostic Trouble Codes (DTCs) first. If only DTC B1414:81 was retrieved, INSTALL a new driver door side impact sensor. REFER to: Front Door Side Impact Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B1414:96 | Driver Side Restraints Sensor 1: Component Internal Failure |
INSTALL a new driver door side impact sensor. REFER to: Front Door Side Impact Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B1415:11 | Driver Side Restraints Sensor 2: Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: AA (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1415:12 | Driver Side Restraints Sensor 2: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: AA (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1415:13 | Driver Side Restraints Sensor 2: Circuit Open |
REFER to: Pinpoint Test - DTC: AA (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1415:2B | Driver Side Restraints Sensor 2: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1415:4A | Driver Side Restraints Sensor 2: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1415:81 | Driver Side Restraints Sensor 2: Invalid Serial Data Received |
DIAGNOSE and REPAIR all other impact sensor Diagnostic Trouble Codes (DTCs) first. If only DTC B1415:81 was retrieved, INSTALL a new LH C-pillar side impact sensor. REFER to: C-Pillar Side Impact Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B1415:96 | Driver Side Restraints Sensor 2: Component Internal Failure |
INSTALL a new LH C-pillar side impact sensor. REFER to: C-Pillar Side Impact Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B1417:11 | Passenger Frontal Restraints Sensor: Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: BB (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1417:12 | Passenger Frontal Restraints Sensor: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: BB (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1417:13 | Passenger Frontal Restraints Sensor: Circuit Open |
REFER to: Pinpoint Test - DTC: BB (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1417:2B | Passenger Frontal Restraints Sensor: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1417:4A | Passenger Frontal Restraints Sensor: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1417:81 | Passenger Frontal Restraints Sensor: Invalid Serial Data Received |
DIAGNOSE and REPAIR all other impact sensor Diagnostic Trouble Codes (DTCs) first. If only DTC B1417:81 was retrieved, INSTALL a new RH front impact severity sensor. REFER to: Front Impact Severity Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B1417:96 | Passenger Frontal Restraints Sensor: Component Internal Failure |
INSTALL a new RH front impact severity sensor. REFER to: Front Impact Severity Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B1418:11 | Passenger Side Restraints Sensor 1: Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: AA (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1418:12 | Passenger Side Restraints Sensor 1: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: AA (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1418:13 | Passenger Side Restraints Sensor 1: Circuit Open |
REFER to: Pinpoint Test - DTC: AA (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1418:2B | Passenger Side Restraints Sensor 1: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1418:4A | Passenger Side Restraints Sensor 1: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1418:81 | Passenger Side Restraints Sensor 1: Invalid Serial Data Received |
DIAGNOSE and REPAIR all other impact sensor Diagnostic Trouble Codes (DTCs) first. If only DTC B1418:81 was retrieved, INSTALL a new passenger door side impact sensor. REFER to: Front Door Side Impact Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B1418:96 | Passenger Side Restraints Sensor 1: Component Internal Failure |
INSTALL a new passenger door side impact sensor. REFER to: Front Door Side Impact Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B1419:11 | Passenger Side Restraints Sensor 2: Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: Z (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1419:12 | Passenger Side Restraints Sensor 2: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: Z (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1419:13 | Passenger Side Restraints Sensor 2: Circuit Open |
REFER to: Pinpoint Test - DTC: Z (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1419:2B | Passenger Side Restraints Sensor 2: Signal Cross Coupled |
REFER to: Pinpoint Test - DTC: CC (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1419:4A | Passenger Side Restraints Sensor 2: Incorrect Component Installed |
REFER to: Pinpoint Test - DTC: DD (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1419:81 | Passenger Side Restraints Sensor 2: Invalid Serial Data Received |
DIAGNOSE and REPAIR all other impact sensor Diagnostic Trouble Codes (DTCs) first. If only DTC B1419:81 was retrieved, INSTALL a new RH C-pillar side impact sensor. REFER to: C-Pillar Side Impact Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B1419:96 | Passenger Side Restraints Sensor 2: Component Internal Failure |
INSTALL a new RH C-pillar side impact sensor. REFER to: C-Pillar Side Impact Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B142D:00 | Pyrotechnic End of Life Activation Performed: No Sub Type Information |
INSTALL a new RCM and CARRY OUT PMI. Use As-Built data when carrying out PMI for this DTC. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| B1492:68 | Fuel Cutoff Event: Event Information |
|
| C0061:68 | Lateral Acceleration Sensor: Event Information |
REFER to: Pinpoint Test - DTC: EE (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| C0062:68 | Longitudinal Acceleration Sensor: Event Information |
REFER to: Pinpoint Test - DTC: EE (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| C0063:68 | Yaw Rate Sensor: Event Information |
REFER to: Pinpoint Test - DTC: EE (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| C0064:68 | Roll Rate Sensor: Event Information |
REFER to: Pinpoint Test - DTC: EE (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| C0065:68 | Vertical Acceleration Sensor: Event Information |
REFER to: Pinpoint Test - DTC: EE (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U0028:88 | Vehicle Communication Bus A: Bus Off |
INSTALL a new RCM. Use As-Built data when carrying out PMI for this DTC. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| U0100:00 | Lost Communication with ECM/PCM A: No Sub Type Information |
REFER to: Pinpoint Test - DTC: SS (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U0112:00 | Lost Communication with Battery Energy Control Module "B": No Sub Type Information |
REFER to: Pinpoint Test - DTC: TT (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U0140:00 | Lost Communication with Body Control Module: No Sub Type Information |
REFER to: Pinpoint Test - DTC: FF (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U0146:00 | Lost Communication with Gateway "A": No Sub Type Information |
REFER to: Pinpoint Test - DTC: AAA (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U0154:00 | Lost Communication with Restraints Occupation Classification System Module: No Sub Type Information |
REFER to: Pinpoint Test - DTC: GG (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U0253:00 | Lost Communication With Accessory Protocol Interface Module: No Sub Type Information |
REFER to: Pinpoint Test - DTC: HH (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U0401:00 | Invalid Data Received From ECM/PCM A: No Sub Type Information |
NOTE: This DTC sets in a module that is reporting a missing or invalid message from another module on the data bus. The module that reports the fault is not the problem module. Do not install a new RCM as part of the repair unless directed to do so in a pinpoint test. CHECK for additional RCM and PCM Diagnostic Trouble Codes (DTCs). DIAGNOSE and REPAIR any Diagnostic Trouble Codes (DTCs) that are retrieved. For RCM Diagnostic Trouble Codes (DTCs), REFER to the RCM DTC Chart. To diagnose PCM Diagnostic Trouble Codes (DTCs), Refer to the appropriate section in Group 303 for the procedure. If the DTC is not listed in the workshop manual, Refer to Powertrain Control/Emissions Diagnosis (PC/ED) manual. |
| U0401:81 | Invalid Data Received From ECM/PCM A: Invalid Serial Data Received |
NOTE: This DTC sets in a module that is reporting a missing or invalid message from another module on the data bus. The module that reports the fault is not the problem module. Do not install a new RCM as part of the repair unless directed to do so in a pinpoint test. CHECK for additional RCM and PCM Diagnostic Trouble Codes (DTCs). DIAGNOSE and REPAIR any Diagnostic Trouble Codes (DTCs) that are retrieved. For RCM Diagnostic Trouble Codes (DTCs), REFER to the RCM DTC Chart. To diagnose PCM Diagnostic Trouble Codes (DTCs), Refer to the appropriate section in Group 303 for the procedure. If the DTC is not listed in the workshop manual, Refer to Powertrain Control/Emissions Diagnosis (PC/ED) manual. |
| U0413:00 | Invalid Data Received From Battery Energy Control Module "B": No Sub Type Information |
NOTE: This DTC sets in a module that is reporting a missing or invalid message from another module on the data bus. The module that reports the fault is not the problem module. Do not install a new RCM as part of the repair unless directed to do so in a pinpoint test. CHECK for additional RCM and BECMB Diagnostic Trouble Codes (DTCs). DIAGNOSE and REPAIR any Diagnostic Trouble Codes (DTCs) that are retrieved. For RCM Diagnostic Trouble Codes (DTCs), REFER to the RCM DTC Chart. To diagnose BECMB Diagnostic Trouble Codes (DTCs), REFER to the BECMB DTC Chart. |
| U0413:56 | Invalid Data Received From Battery Energy Control Module "B": Invalid / Incompatible Configuration |
NOTE: This DTC sets in a module that is reporting a missing or invalid message from another module on the data bus. The module that reports the fault is not the problem module. Do not install a new RCM as part of the repair unless directed to do so in a pinpoint test. REFER to: Pinpoint Test - DTC: YY (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U0413:92 | Invalid Data Received From Battery Energy Control Module "B": Invalid / Incompatible Configuration |
NOTE: This DTC sets in a module that is reporting a missing or invalid message from another module on the data bus. The module that reports the fault is not the problem module. Do not install a new RCM as part of the repair unless directed to do so in a pinpoint test. This DTC indicates that there is a BECMB fault present. CARRY OUT a self-test for the BECMB. DIAGNOSE and REPAIR the BECMB Diagnostic Trouble Codes (DTCs). REFER to the BECMB DTC Chart. |
| U0422:00 | Invalid Data Received From Body Control Module: No Sub Type Information |
NOTE: This DTC sets in a module that is reporting a missing or invalid message from another module on the data bus. The module that reports the fault is not the problem module. Do not install a new RCM as part of the repair unless directed to do so in a pinpoint test. CHECK for additional RCM and BCM Diagnostic Trouble Codes (DTCs). DIAGNOSE and REPAIR any Diagnostic Trouble Codes (DTCs) that are retrieved. For RCM Diagnostic Trouble Codes (DTCs), REFER to the RCM DTC Chart. For BCM Diagnostic Trouble Codes (DTCs),REFER to: Body Control Module (BCM) (419-10 Multifunction Electronic Modules, Diagnosis and Testing). |
| U0422:81 | Invalid Data Received From Body Control Module: Invalid Serial Data Received |
NOTE: This DTC sets in a module that is reporting a missing or invalid message from another module on the data bus. The module that reports the fault is not the problem module. Do not install a new RCM as part of the repair unless directed to do so in a pinpoint test. CHECK for additional RCM and BCM Diagnostic Trouble Codes (DTCs). DIAGNOSE and REPAIR any Diagnostic Trouble Codes (DTCs) that are retrieved. For RCM Diagnostic Trouble Codes (DTCs), REFER to the RCM DTC Chart. For BCM Diagnostic Trouble Codes (DTCs),REFER to: Body Control Module (BCM) (419-10 Multifunction Electronic Modules, Diagnosis and Testing). |
| U0455:81 | Invalid Data Received From Restraints Occupant Classification Module: Invalid Serial Data Received |
NOTE: This DTC sets in a module that is reporting a missing or invalid message from another module on the data bus. The module that reports the fault is not the problem module. Do not install a new RCM as part of the repair unless directed to do so in a pinpoint test. CHECK for additional RCM and OCSM Diagnostic Trouble Codes (DTCs). DIAGNOSE and REPAIR any Diagnostic Trouble Codes (DTCs) that are retrieved. For RCM Diagnostic Trouble Codes (DTCs), REFER to the RCM DTC Chart. For OCSM Diagnostic Trouble Codes (DTCs), REFER to the OCSM DTC Chart. |
| U0554:00 | Invalid Data Received From Accessory Protocol Interface Module: No Sub Type Information | CHECK for additional RCM and APIM Diagnostic Trouble Codes (DTCs). For RCM Diagnostic Trouble Codes (DTCs), RETURN to the beginning of this chart. For APIM Diagnostic Trouble Codes (DTCs). Refer to the appropriate section in Group 415 for the procedure. |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | CHECK vehicle history for recent service actions related to this module. This DTC sets due to incomplete or improper PMI procedures. If there have been recent service actions with this module, REPEAT the PMI procedure as directed by the diagnostic scan tool using As-Built data. |
| U2101:00 | Control Module Configuration Incompatible: No Sub Type Information |
CARRY OUT PMI using As-Built data. RETRIEVE RCM Diagnostic Trouble Codes (DTCs). If RCM
DTC U2101:00 is retrieved on-demand, INSTALL a new RCM. Use As-Built data when carrying out PMI for this DTC. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| U2200:00 | Control Module Configuration Memory Corrupt: No Sub Type Information |
INSTALL a new RCM and CARRY OUT PMI using a diagnostic scan tool. Use As-Built data when carrying out PMI for this DTC. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| U2300:55 | Central Configuration: Not Configured |
REFER to: Pinpoint Test - DTC: II (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U2300:64 | Central Configuration: Signal Plausibility Failure |
REFER to: Pinpoint Test - DTC: II (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U3000:04 | Control Module: System Internal Failure |
INSTALL a new RCM. Using a diagnostic scan tool, CARRY OUT PMI using As-Built data. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| U3000:46 | Control Module: Calibration / Parameter Memory Failure |
INSTALL a new RCM. Using a diagnostic scan tool, CARRY OUT PMI using As-Built data. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| U3000:49 | Control Module: Internal Electronic Failure |
INSTALL a new RCM. Using a diagnostic scan tool, CARRY OUT RCM
PMI. If DTC U2200:00 is also present, use As-Built data when carrying out PMI for this DTC. REFER to: Restraints Control Module (RCM) (501-20B Supplemental Restraint System, Removal and Installation). |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold |
REFER to: Pinpoint Test - DTC: JJ (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold |
REFER to: Pinpoint Test - DTC: JJ (501-20B Supplemental Restraint System, Diagnosis and Testing). |
DTC Chart: Occupant Classification System Module (OCSM)
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices.
REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
OCSM DTC Chart
| DTC | Description | Action |
|---|---|---|
| B0061:11 | Passenger Seatbelt Tension Sensor: Circuit Short To Ground |
REFER to: Pinpoint Test - DTC: KK (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0061:12 | Passenger Seatbelt Tension Sensor: Circuit Short To Battery |
REFER to: Pinpoint Test - DTC: KK (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0061:13 | Passenger Seatbelt Tension Sensor: Circuit Open |
REFER to: Pinpoint Test - DTC: KK (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B0061:64 | Passenger Seatbelt Tension Sensor: Signal Plausibility Failure |
REFER to: Pinpoint Test - DTC: KK (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00C0:11 | Passenger Seat Occupant Classification Sensor "A": Circuit Short to Ground |
INSTALL a new OCS sensor. REFER to: Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B00C0:12 | Passenger Seat Occupant Classification Sensor "A": Circuit Short to Battery |
INSTALL a new OCS sensor. REFER to: Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B00C0:16 | Passenger Seat Occupant Classification Sensor "A": Circuit Voltage Below Threshold |
INSTALL a new OCS sensor. REFER to: Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B00C0:49 | Passenger Seat Occupant Classification Sensor "A": Internal Electronic Failure |
INSTALL a new OCS sensor. REFER to: Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| B00C0:7B | Passenger Seat Occupant Classification Sensor "A": Low Fluid Level |
|
| B00C2:11 | Passenger Seat Occupant Classification Sensor "C": Circuit Short to Ground |
REFER to: Pinpoint Test - DTC: LL (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00C2:12 | Passenger Seat Occupant Classification Sensor "C": Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: LL (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1193:00 | Crash Event Storage Full and Locked: No Sub Type Information |
CLEAR the OCSM Diagnostic Trouble Codes (DTCs) and REPEAT the self-test. If DTC B1193:00 returns, INSTALL a new OCS sensor. INSTALL a new OCS sensor. REFER to: Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| U0100:00 | Lost Communication with ECM/PCM A: No Sub Type Information |
REFER to: Pinpoint Test - DTC: SS (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U0151:00 | Lost Communication with Restraints Control Module: No Sub Type Information |
REFER to: Pinpoint Test - DTC: NN (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U0401:00 | Invalid Data Received from ECM/PCM A: No Sub Type Information | CARRY OUT the PCM self-test. REFER to the appropriate workshop manual section. Refer to the appropriate section in Group 303 for the procedure. |
| U3000:41 | Control Module: General Checksum Failure |
INSTALL a new OCS sensor. REFER to: Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| U3000:42 | Control Module: General Memory Failure |
INSTALL a new OCS sensor. REFER to: Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| U3000:46 | Control Module: Calibration / Parameter Memory Failure |
INSTALL a new OCS sensor. REFER to: Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| U3000:54 | Control Module: Missing Calibration |
Using a diagnostic scan tool, CARRY OUT the OCS Reset. FOLLOW all instructions on the diagnostic scan tool. If the OCS Reset was not successful, VERIFY correct installation of the OCS. VERIFY the pressure sensor hose is correctly routed and CORRECT the installation as necessary. REPEAT the self-test. If DTC U3000:54 is still present, INSTALL a new OCS sensor. REFER to: Occupant Classification System (OCS) Sensor (501-20B Supplemental Restraint System, Removal and Installation). |
| U3003:16 | Battery Voltage: Circuit Voltage Below Threshold |
REFER to: Pinpoint Test - DTC: JJ (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U3003:17 | Battery Voltage: Circuit Voltage Above Threshold |
REFER to: Pinpoint Test - DTC: JJ (501-20B Supplemental Restraint System, Diagnosis and Testing). |
DTC Chart: Extended Power Module [BECM-B]
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices.
REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
BECMB DTC Chart
| DTC | Description | Action |
|---|---|---|
| B00A0:11 | Occupant Classification System: Circuit Short To Ground |
REFER to: Pinpoint Test - DTC: UU (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B00A0:12 | Occupant Classification System: Circuit Short To Battery |
REFER to: Pinpoint Test - DTC: UU (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1123:11 | Restraints Ignition Relay: Circuit Open |
REFER to: Pinpoint Test - DTC: UU (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1123:12 | Restraints Ignition Relay: Circuit Voltage Out of Range |
REFER to: Pinpoint Test - DTC: UU (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B1142:62 | Ignition Status 1: Signal Compare Failure |
REFER to: Pinpoint Test - DTC: VV (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| B13BF:12 | Run/Start Input: Circuit Short to Battery |
REFER to: Pinpoint Test - DTC: VV (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U0100:87 | Lost Communication with ECM/PCM A: Missing Message |
REFER to: Pinpoint Test - DTC: WW (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U0140:87 | Lost Communication with Body Control Module: Missing Message |
REFER to: Pinpoint Test - DTC: XX (501-20B Supplemental Restraint System, Diagnosis and Testing). |
| U1000:00 | Solid State Driver Protection Active -Driver Disabled |
DIAGNOSE any other BECMB Diagnostic Trouble Codes (DTCs) first. CLEAR the Diagnostic Trouble Codes (DTCs). REPEAT the self-test. If DTC U1000:00 returns, INSTALL a new BECMB. REFER to: Battery Energy Control Module B (BECMB) (501-20B Supplemental Restraint System, Removal and Installation). |
| U2100:00 | Initial Configuration Not Complete: No Sub Type Information | CHECK vehicle history for recent service actions related to this module. This DTC sets due to incomplete or improper PMI procedures. If there have been recent service actions with this module, REPEAT the PMI procedure as directed by the diagnostic scan tool using As-Built data. |
| U3000:49 | Control Module: Internal Electronic Failure |
INSTALL a new BECMB. REFER to: Battery Energy Control Module B (BECMB) (501-20B Supplemental Restraint System, Removal and Installation). |
Symptom Chart(s)
Symptom Chart: Supplemental Restraint System
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices.
REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
Symptom Chart
| Condition | Possible Sources | Actions |
|---|---|---|
| A module does not respond to the diagnostic scan tool |
|
|
| An audible tone sounds within 60 seconds of ignition ON |
|
|
| The airbag indicator is flashing |
|
|
| The airbag warning indicator is illuminated continuously |
|
|
Pinpoint Test - DTC: A. Diagnosis and Testing
B0001:11, B0001:12, B0001:13 and B0001:1A
Refer to Wiring Diagrams Cell 46 for schematic and connector information.
Normal Operation and Fault Conditions
The RCM continuously monitors the driver airbag stage 1 circuits for the following faults:
Resistance out of range
Unexpected voltage
Short to ground
Faulted driver airbag
If a fault is detected, the RCM..
Other information:
Ford Fusion 2013–2020 Service Manual: Main Control Cover - 2.0L EcoBoost (184kW/250PS) – MI4. Removal and Installation
Materials Name Specification Motorcraft® Ultra Silicone SealantTA-29 WSS-M4G323-A8 Removal With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview (100-02 Jacking and Lifting, Description and Operation). Remove the air cleaner assembly. Refer to: Air Cleaner (303-12B Intake Air Distribution and Filtering - 2.0L..
Ford Fusion 2013–2020 Service Manual: Engine. Disassembly
Special Tool(s) / General Equipment 100-001 (T50T-100-A) Slide Hammer 300-OTC1819E2,200# Floor Crane, Fold Away 303-1097Locking Tool, Variable Camshaft Timing Oil Control UnitTKIT-2010B-FLMTKIT-2010B-ROW 303-1502Lifting Device EngineTKIT-2012A-FLTKIT-2012A-ROW 303-409 (T92C-6700-CH) Remover, Crankshaft SealTKIT-1992-FH/FMH/FLMHTKIT-1993-LMH/MH 303-748L..
Categories
- Manuals Home
- 2nd Generation Ford Fusion Owners Manual
- 2nd Generation Ford Fusion Service Manual
- Main Control Valve Body. Removal and Installation
- Electrical
- Front Controls Interface Module (FCIM). Removal and Installation
- New on site
- Most important about car
Parallel Parking
The system detects available parallel parking spaces and steers your vehicle into the space. You control the accelerator, gearshift and brakes. The system visually and audibly guides you into a parallel parking space.
Press the button once to search
for a parking space.
Copyright © 2024 www.fofusion2.com