Ford Fusion: Service Information / Noise, Vibration and Harshness

Jacking and Lifting - Overview. Description and Operation

Jacking Points   WARNING: Before beginning any service procedure in this manual, refer to health and safety warnings in section 100-00 General Information...

Noise, Vibration and Harshness (NVH). Description and Operation

Acceptable Noise, Vibration and Harshness (NVH) Noise is any undesirable sound, usually unpleasant in nature. Vibration is any motion, shaking or trembling, that can be felt or seen when an object moves back and forth or up and down...

Other information:

Ford Fusion 2013–2020 Service Manual: Azimuth System Check. General Procedures

Check NOTE: The object used in this system check can be fabricated using a 9 cm diameter (3 in I.D.) pipe, 100 cm (39 in) in length (available as Polyvinyl Chloride (PVC) pipe, or similar from a hardware or plumbing supply. NOTE: The following system check should be carried out with the vehicle on a level surface...

Ford Fusion 2013–2020 Service Manual: Rear Drive Axle and Differential. Diagnosis and Testing

Preliminary Inspection Visually inspect the housing, seals, and pinion flange for obvious signs of mechanical damage. If an obvious cause for an observed or reported concern is found, correct the cause (if possible) before proceeding to the next step If the cause is not visually evident, verify the symptom and REFER to Symptom Chart: NVH...