Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
WARNING:
Turn the ignition OFF and wait one minute to deplete
the backup power supply. Ignition must remain OFF until repair is
complete. Failure to follow this instruction may result in serious
personal injury or death in the event of an accidental deployment.
If a SRS fault is present, con..
Removal
Release the clips and remove the loadspace trim panel.
Disconnect the AWD module electrical connector.
Remove the AWD module push pin fasteners and the AWD module.
Installation
Install the AWD module and the push pin fasteners.
Connect the AWD module electrical connector.
..