Other information:
Check
NOTE:
Refer to the appropriate Section 303-01 for the specification.
Measure the piston diameter 90 degrees from the piston
pin and 41 mm (1.61 in) down from the top of the piston at the point
indicated.
..
Overview
The front subframe is bolted to the body and is used to:
aid in structural support.
provide mounting surfaces for the steering gear.
provide mounting surfaces for the front suspension lower
control arms, the transmission roll restrictor and for the front
stabilizer bar.
The rear subframe is bolted to the body and is used to:
aid in structural support.
pr..