Ford Fusion: Perimeter Anti-Theft Alarm / Perimeter Anti-Theft Alarm - Overview. Description and Operation
Overview
The perimeter alarm system deters unauthorized entry into the vehicle by sounding the horn and flashing all the turn signals and interior courtesy lamps. When an unauthorized entry occurs, the horn and lamps activate for 30 seconds. After 30 seconds, the horn stops sounding, but the lamps continue to flash for up to 5 minutes.
The panic alarm operates similar to the perimeter alarm, but only activates using the panic button on the RKE transmitter.
Perimeter Anti-Theft Alarm - System Operation and Component Description. Description and Operation
System Operation
System Diagram
Item
Description
1
BCM
2
Turn Signals
3
Horn
4
Door Ajar Switches
5
Hood Ajar Switch
6
Luggage Compartment Lid Ajar Switch
7
Right Door Lock Control Switch
8
IPC
9
Courtesy Lamps
10
Passive Key
11
RTM
12
Ignition Switch
13
DDM
14
GWM
15
GWM
16
PDM
..
Other information:
Ford Fusion 2013–2020 Owners Manual: Cleaning the Windows and Wiper Blades. Cleaning the Interior
Cleaning the Windows and Wiper Blades Car wash chemicals and environmental fallout can result in windshield and wiper blade contamination. Dirty windshield and wipers will result in poor windshield wiper operation. Keep the windshield and wiper blades clean to maintain windshield wiper performance. To clean the windshield and wiper blades: Clean the windshield with a non-abrasive glass c..
Ford Fusion 2013–2020 Service Manual: Hood Latch. Removal and Installation
Removal NOTE: Removal steps in this procedure may contain installation details. Remove the front bumper cover. Refer to: Front Bumper Cover (501-19 Bumpers, Removal and Installation). Left Hand (LH) Disconnect the hood ajar switch electrical connector and position aside the wiring harness. Remove the hood latch. Remove the nut..
Categories
- Manuals Home
- 2nd Generation Ford Fusion Owners Manual
- 2nd Generation Ford Fusion Service Manual
- Load Carrying
- Electronic Parking Brake (EPB) Service Mode Activation and Deactivation. General Procedures
- Pre-Collision Assist (IF EQUIPPED)
- New on site
- Most important about car
Understanding Your Tire Pressure Monitoring System
The tire pressure monitoring system measures pressure in your road tires and sends the tire pressure readings to your vehicle. You can view the tire pressure readings through the information display. The low tire pressure warning light will turn on if the tire pressure is significantly low. Once the light is illuminated, your tires are under-inflated and need to be inflated to the manufacturer’s recommended tire pressure. Even if the light turns on and a short time later turns off, your tire pressure still needs to be checked.
