Ford Fusion: Engine / Accessory Drive - 1.5L EcoBoost (118kW/160PS) – I4

Wastegate Control Valve Solenoid. Removal and Installation

Removal NOTICE: Whenever turbocharger air intake system components are removed, always cover open ports to protect from debris. It is important that no foreign material enter the system...

Accessory Drive - Component Location. Description and Operation

Early Build Vehicles Item Description 1 Accessory drive belt tensioner 2 Water pump pulley 3 Crankshaft belt pulley 4 Pulley - A/C compressor 5 Drive belt idler pulley assembly 6 Generator pulley 7 Accessory drive belt Late Build Vehicles Item Description 1 Coolant pump pulley 2 Generator...

Other information:

Ford Fusion 2013–2020 Service Manual: Rear Door Skin Panel. Removal and Installation

Special Tool(s) / General Equipment Grinder Knife MIG/MAG Welding Equipment Materials Name Specification Metal Bonding AdhesiveTA-1, TA-1-B, 3M™ 08115, LORD Fusor® 108B -  Seam SealerTA-2-B, 3M™ 08308, LORD Fusor® 803DTM -  Flexible Foam Repair3M™ 08463, LORD Fusor® 121 -  Removal   WARNING: Before beginnin..

Ford Fusion 2013–2020 Service Manual: Brake Fluid Reservoir. Removal and Installation

Materials Name Specification Motorcraft® DOT 4 LV High Performance Motor Vehicle Brake FluidPM-20 WSS-M6C65-A2  Removal NOTICE: If the brake fluid is spilled on the paintwork, the affected area must be immediately washed down with cold water. NOTE: Removal steps in this procedure may contain installation details. Remove the brake master cylinder. Refer ..