Ford Fusion: Brake System / Parking Brake and Actuation

Rear Brake Flexible Hose. Removal and Installation

Removal NOTICE: Do not spill brake fluid on painted or plastic surfaces or damage to the surface may occur. If brake fluid is spilled onto a painted or plastic surface, immediately wash the surface with water...

Parking Brake - Overview. Description and Operation

Overview The parking brake system uses 2 switch activated, Electronic Control Unit (ECU) controlled motors to apply and release the rear brake calipers...

Other information:

Ford Fusion 2013–2020 Service Manual: Component Bleeding. General Procedures

Special Tool(s) / General Equipment Master Cylinder Bleeding Set Bleeding NOTICE: If the fluid is spilled on the paintwork, the affected area must be immediately washed down with cold water. Master Cylinder NOTE: When a new brake master cylinder has been installed, it should be primed to prevent air from entering the system...

Ford Fusion 2013–2020 Service Manual: Front Side Member Section. Removal and Installation

Special Tool(s) / General Equipment Resistance Spotwelding Equipment Air Body Saw 8 mm Drill Bit MIG/MAG Welding Equipment Spot Weld Drill Bit Locking Pliers Materials Name Specification Seam SealerTA-2-B, 3M™ 08308, LORD Fusor® 803DTM -  Removal NOTE: The required partial replacement sections need to be cut out from the outer side me..